|
Name: ____________________
Department: ____________________
Date: ____________________
Supervisor: ____________________
Alaris® PC point-of-care unit
_______ 1: Alaris® System Overview
_______ 2:
General Setup and Operation
_______ 3: Alarms, Errors, and Messages
Programming Infusions
_______ 1: Guardrails® continuous infusion
_______ 2: Guardrails® bolus dose
_______ 3: Guardrails® intermittent infusion
_______
4. Guardrails® IV fluid infusion
_______ 5. Infusion without Guardrails® limits
Alaris® Pump module
_______ 1: Alaris® Pump module Overview
_______ 2: Preparing an Infusion
_______ 3: Primary and Secondary Infusions
Alaris® Syringe module
_______ 1: Alaris® Syringe module Overview
_______ 2: Preparing an Infusion
_______ 3: Working with an Infusion
Alaris® PCA module
_______ 1: Alaris® PCA module Overview
_______ 2: Preparing an Infusion
_______ 3: PCA Infusion Modes
_______ 4: Delivering a Bolus Dose
_______ 5: Changing or Restoring an Infusion
_______ 6: Viewing Patient and Drug Event History
_______
7: Guardrails® PCA Pause Protocol
_______ 8: Other Settings and Alarms
Alaris® SpO2 module
_______ 1: Alaris® SpO2 module
Overview
_______ 2: Changing Default Alarm Limits
_______ 3: Navigating Trend Data
_______ 4: Pre-Silence
_______ 5a: Responding to Alarms with Nellcor® Technology
_______ 5b: Responding to Alarms with Masimo® Technology
_______ 6a: Setting Options with Nellcor® Technology
_______ 6b: Setting Options with Masimo® Technology
Alaris® EtCO2 module
_______ 1: Overview of End Tidal CO2 Monitoring
_______ 2.
Setup and Basic Operation
_______ 3: Changing Default Alarm Limits
_______ 4: Navigating Trend Data
_______ 5: Pre-Silencing Alarms
_______ 6: Responding to Alarms
_______ 7: Setting Options
_______ 8.
Assessment Changes and Cases
SmartSite® needle-free system
_______ 1: SmartSite® needle-free valve
_______ 2: SmartSite® positive bolus needle-free valve
Alaris® Auto-ID module
_______ 1: Alaris® Auto-ID module
Anesthesia Mode
_______ 1: Anesthesia Mode
|
