Alaris® Pump module
Topic 2: Preparing an Infusion


Page 3 of 12

Glossary

Resources

Back

Next

Menu

Exit


Priming the Administration Set

1. Close roller clamp.

2. Insert the spike into the fluid container, following accepted hospital procedure, and hang the container 20 inches above the Alaris® Pump module.

3. Fill the drip chamber to 2/3 full.

4. Open roller clamp and slowly prime tubing. (Slow priming helps to minimize turbulence that can cause air bubbles to form.)

  • To remove visible air from the SmartSite® needle-free valve, invert and tap the valve while fluid is passing.
  • To remove the 0.4 mL of air present when the valve is activated, attach a luer lock syringe to the valve and aspirate the air.