Alaris® Pump module
Topic 2: Preparing an Infusion


Page 7 of 12

Glossary

Resources

Back

Next

Menu

Exit


Removing and Reloading a Set

To remove an administration set:

  1. Press the Pause key on the Alaris® Pump module.
  2. Close the roller clamp.
  3. Open the Alaris® Pump module door, which automatically closes the safety clamp* on the pumping mechanism.
  4. Remove the safety clamp on the pumping mechanism by gently pulling out the tubing below the Air-in-Line Detector.
  5. Lift the upper fitment from its recess.

Reload the set in the same manner you load a new one, except that the safety clamp on the pumping mechanism will already be closed to prevent free flow.

*Referred to on device as Flo-Stop Fitment.